Half-Life Calculations Explained: Decay Equations, Graphs and Worked Examples
physicschemistryradioactivityscience calculationsstudent reference

Half-Life Calculations Explained: Decay Equations, Graphs and Worked Examples

NNatural Science Editorial Team
2026-11-10
6 min read

Learn how to calculate half-life, radioactive decay, remaining activity and graph-based answers with clear equations and worked examples.

Half-life calculations show how radioactive material changes over time. This guide explains how to calculate the remaining quantity, activity, decay constant and half-life, with worked examples for equations and graphs. It also shows how to check units, choose sensible significant figures and use a half-life calculator without treating its output as a substitute for the working.

Overview

The half-life of a radioactive isotope is the time required for half of a sample’s unstable nuclei to decay. After one half-life, 50% remains; after two, 25% remains; after three, 12.5% remains. The sample does not become zero after a fixed number of half-lives. Instead, the quantity decreases exponentially and approaches zero over time.

Half-life calculations are used for the number of undecayed nuclei, mass, activity and sometimes the concentration of a radioactive substance. The same mathematical pattern applies to each quantity, provided the quantity is proportional to the amount of radioactive material present.

The simplest relationship is:

Remaining quantity = initial quantity × (1/2)n

Here, n is the number of elapsed half-lives:

n = elapsed time ÷ half-life

For example, if a sample has a half-life of 6 hours, then 18 hours represents three half-lives. The remaining amount is therefore:

initial quantity × (1/2)3 = initial quantity × 1/8

One-eighth remains, or 12.5% of the starting amount.

How to estimate

Method 1: Count repeated half-lives

Use this method when the elapsed time is an exact multiple of the half-life.

  1. Write down the initial quantity.
  2. Divide the elapsed time by the half-life.
  3. Reduce the quantity by half once for each half-life.
  4. State the answer with an appropriate unit.

Suppose a sample begins with 80 milligrams and has a half-life of 4 days. After 4 days, 40 mg remains. After 8 days, 20 mg remains. After 12 days, 10 mg remains. The calculation gives the same result: 80 × (1/2)3 = 10 mg.

Method 2: Use the radioactive decay equation

For any elapsed time, including a fraction of a half-life, use:

N = N0(1/2)t/T

In this equation, N is the remaining quantity, N0 is the initial quantity, t is the elapsed time and T is the half-life. The units for t and T must match. If time is given in minutes, use a half-life in minutes; do not combine minutes with hours without converting one of them.

An equivalent form uses the decay constant, written as λ (lambda):

N = N0e−λt

The relationship between decay constant and half-life is:

λ = ln(2) ÷ T

Conversely:

T = ln(2) ÷ λ

Use the first equation when a problem gives a half-life directly. Use the exponential form when the decay constant is provided or when a calculator is set up for natural exponentials.

Method 3: Read a half-life graph

A decay graph normally places time on the horizontal axis and the remaining quantity, count rate or activity on the vertical axis. To estimate the half-life, choose a clear starting value, find half of that value on the vertical axis, and read across to the curve. Then read down to the time axis.

For instance, if the curve starts at 1,000 counts per minute and reaches 500 counts per minute at 8 minutes, the estimated half-life is 8 minutes. Check the next halving: if the curve reaches approximately 250 counts per minute at 16 minutes, the graph is consistent with a half-life of about 8 minutes.

Graph readings are estimates. The line thickness, scale intervals and experimental scatter can limit the number of figures that can be reported.

Inputs and assumptions

A reliable half-life calculation depends on identifying the right inputs before entering numbers into a calculator.

  • Initial quantity: This may be mass, number of nuclei, activity, count rate or another proportional measure.
  • Elapsed time: Use the time between the initial and final measurements, not necessarily the time since the material was produced.
  • Half-life: Confirm that the value refers to the isotope being considered. Different isotopes have different half-lives.
  • Consistent units: Convert hours, minutes, seconds, days or years so that elapsed time and half-life use the same unit.
  • Quantity being measured: Activity and count rate can fall with radioactive decay, but a detector reading may also depend on geometry, shielding, background radiation and efficiency.

The standard equations assume a single radioactive decay process with a constant half-life. They also describe the radioactive component itself, rather than every factor that may affect an instrument reading. In a practical experiment, subtracting a measured background count may be necessary if the instructions or experimental method require it.

Keep extra digits during intermediate calculations and round the final result. The number of reported figures should not imply more precision than the measurements or graph support. For a refresher on rounding and uncertainty, see Significant Figures in Science: Rules, Rounding and Calculations Explained.

Worked examples

Example 1: Finding the remaining mass

A radioactive sample has an initial mass of 64 g and a half-life of 5 hours. How much remains after 15 hours?

First calculate the number of half-lives:

n = 15 hours ÷ 5 hours = 3

Then apply the repeated-halving method:

remaining mass = 64 × (1/2)3 = 64 × 1/8 = 8 g

Assuming the mass is being used as a measure of the radioactive material, 8 g remains after 15 hours.

Example 2: Finding the remaining activity after a fractional half-life

An initial activity is 900 becquerels. The half-life is 10 minutes. What is the activity after 3 minutes?

Here, the elapsed time is not a whole number of half-lives, so use the decay equation:

A = 900(1/2)3/10

Evaluating the expression gives approximately 732 Bq. The result should normally be rounded to match the precision of the given activity and time. The calculation assumes the activity reading is proportional to the amount of radioactive material and that no additional correction is required.

Example 3: Finding the half-life from two measurements

If a sample falls from 1,600 counts per minute to 200 counts per minute, the final reading is one-eighth of the initial reading. One-eighth equals (1/2)3, so three half-lives have elapsed.

If the measurements were taken 24 minutes apart:

half-life = 24 minutes ÷ 3 = 8 minutes

This shortcut works when the ratio between the two quantities corresponds clearly to an integer number of halvings. For other ratios, use logarithms:

t = T × log(N/N0) ÷ log(1/2)

Use the same logarithm type in the numerator and denominator. A half-life calculator can evaluate these expressions, but writing the ratio and units first makes mistakes easier to spot.

When to recalculate

Recalculate whenever the initial quantity, final measurement, elapsed time or half-life changes. You should also revisit the calculation when a question changes from mass to activity, introduces background correction, or asks for the time needed to reach a particular fraction.

Before accepting an answer, use this checklist:

  1. Have you identified the initial and remaining quantities correctly?
  2. Are the elapsed time and half-life in matching units?
  3. Does the result decrease rather than increase as time passes?
  4. After one half-life, does the equation produce half the starting quantity?
  5. Are the final units and significant figures appropriate?
  6. If you read a graph, have you reported an estimate rather than false precision?

A useful final check is to estimate the answer by repeated halving before using a calculator. If the exact result is far from that estimate, inspect the time conversion, exponent and brackets. This simple comparison makes half-life calculations more reliable in homework, laboratory reports and exam questions.

Related Topics

#physics#chemistry#radioactivity#science calculations#student reference
N

Natural Science Editorial Team

Science Editors

Senior editor and content strategist. Writing about technology, design, and the future of digital media. Follow along for deep dives into the industry's moving parts.