Significant figures show how precisely a scientific result is known. This guide explains the rules for counting significant figures, rounding measurements, choosing the correct rule for each calculation, and recording results clearly in laboratory reports, assignments and spreadsheets.
Overview
Significant figures, also called significant digits, are the digits in a measured or calculated value that communicate its precision. They include all certain digits and one final digit that is uncertain or estimated. For example, a measured length recorded as 12.4 cm contains three significant figures. Recording it as 12.400 cm would imply a finer level of measurement than the original value supports.
The aim is not to make every answer contain the same number of digits. Instead, the result should reflect the least precise information used to obtain it. A calculator may display many digits, but those extra digits are not automatically meaningful. Rounding too early can also introduce avoidable error, so keep additional digits during intermediate steps and round the final answer at the end unless instructions say otherwise.
Significant figures are different from decimal places. The value 4.20 has three significant figures and two decimal places, while 4.2 has two significant figures and one decimal place. This distinction matters because decimal-place rules apply to addition and subtraction, whereas significant-figure rules generally apply to multiplication and division.
| Situation | How to count or round | Example |
|---|---|---|
| Non-zero digits | Always significant | 573 has three significant figures |
| Zeros between non-zero digits | Significant | 1,005 has four significant figures |
| Leading zeros | Not significant; they locate the decimal point | 0.0048 has two significant figures |
| Trailing zeros after a decimal point | Significant | 6.00 has three significant figures |
| Trailing zeros in a whole number | Potentially ambiguous without notation | 1,500 should be written as 1.5 × 103, 1.50 × 103 or 1.500 × 103 |
| Exact counted or defined values | Do not limit the result's precision | 12 eggs or 1 m = 100 cm are treated as exact in the calculation |
Scientific notation is often the clearest way to communicate precision. In 3.2 × 104, the coefficient has two significant figures; in 3.20 × 104, it has three.
How to estimate
Use this repeatable workflow whenever you need significant figures in a scientific calculation:
- Write down the measured inputs and their units. Do not rely on a calculator display alone.
- Identify exact values. Counted objects and defined conversion relationships do not normally restrict the final precision.
- Choose the operation rule. Addition and subtraction use decimal places; multiplication and division use significant figures.
- Calculate without premature rounding. Keep a few guard digits in intermediate results.
- Round once at the end. Match the result to the limiting measurement.
- Check the unit and scale. A correctly rounded number with the wrong unit is still an incorrect result.
Rounding to significant figures
To round a value, start counting at the first non-zero digit. Keep the required number of digits, then inspect the next digit. If it is 5 or greater, increase the final retained digit by one; if it is below 5, leave it unchanged. Remove the remaining digits or express the result in scientific notation.
- 0.006784 rounded to three significant figures is 0.00678, or 6.78 × 10−3.
- 48,732 rounded to three significant figures is 48,700, or 4.87 × 104.
- 9.995 rounded to three significant figures requires a carry: 10.0. Scientific notation, 1.00 × 101, makes the three significant figures explicit.
For a half-way case such as a discarded digit of exactly 5 followed only by zeros, follow the convention required by your course, laboratory or reporting standard. Many school and introductory laboratory settings use the ordinary “round half up” approach. If no convention is given, state the method briefly and apply it consistently.
Operation rules
Addition and subtraction: round the answer to the least number of decimal places in the inputs. For example, 12.11 + 0.3 + 4.006 = 16.416, which rounds to 16.4 because 0.3 is recorded only to the tenths place.
Multiplication and division: round the answer to the smallest number of significant figures in the inputs. For example, 3.42 × 1.6 = 5.472, which becomes 5.5 because 1.6 has two significant figures.
Mixed calculations: follow the mathematical order of operations, but avoid rounding intermediate values more than necessary. In a calculation such as (8.24 − 2.1) ÷ 3.00, first retain the subtraction result as 6.14 for the division step, then report 2.0 because the subtraction is limited to the tenths place and the final division cannot restore precision.
Inputs and assumptions
A significant-figures calculation is only as reliable as its inputs. Before using a significant figures calculator or spreadsheet, record the following:
- Measurement values: preserve the original recorded digits rather than replacing them with rounded values from an earlier step.
- Units: write units beside values and carry them through the calculation. Convert units before calculating when that makes the relationship clearer.
- Instrument resolution: consider the smallest scale division or digital increment. A displayed digit is not necessarily an independently reliable measurement.
- Exact quantities: distinguish counted items and defined conversions from measured quantities. An exact factor does not usually determine the final significant figures.
- Uncertainty: significant figures provide a compact precision convention, but they do not replace an uncertainty estimate. If uncertainty is supplied, it may determine how the value should be rounded.
- Ambiguous zeros: use scientific notation when the intended precision of a whole number is unclear.
Do not use significant figures to suggest more certainty than the experiment supports. A result such as 2.347891 g may be mathematically available from a calculator, but it is not appropriate if the balance or sample preparation supports only a few reliable digits.
Worked examples
Example 1: Measuring density
Suppose a sample has a mass of 18.6 g and a volume of 7.2 mL. Density is calculated as:
density = mass ÷ volume = 18.6 g ÷ 7.2 mL = 2.5833… g/mL
The mass has three significant figures and the volume has two, so the reported density is 2.6 g/mL. Keep the unrounded calculator value until the final step.
Example 2: Combining measured lengths
Three sections are measured as 5.20 cm, 3.1 cm and 0.46 cm. Their total is:
5.20 + 3.1 + 0.46 = 8.76 cm
The least precise measurement, 3.1 cm, is recorded to one decimal place. The total should therefore be reported as 8.8 cm, not 8.76 cm.
Example 3: An exact conversion
A distance of 2.40 m is converted to centimetres using the defined relationship 1 m = 100 cm:
2.40 m × 100 cm/m = 240 cm
The conversion factor is exact, so the measured value controls the precision. Write 2.40 × 102 cm if you need to show that the result has three significant figures. Writing 240 cm without clarification can be ambiguous.
Example 4: A laboratory result with uncertainty
If a measurement is reported as 14.62 ± 0.18 units, the uncertainty is given to the hundredths place, so the measured value is normally reported to the same place: 14.62 ± 0.18 units. The exact presentation should follow the instructions for the experiment or reporting standard. Do not round the central value to a coarser place while leaving a more precise uncertainty.
When to recalculate
Revisit a significant-figures calculation whenever an input changes, a unit conversion is corrected, or a more precise measurement becomes available. This is especially important when you are checking a spreadsheet, replacing an estimated value with an instrument reading, or comparing results from different laboratory groups.
Use this final checklist before submitting a result:
- Have all measured inputs been copied with their original precision?
- Have exact values been distinguished from measured values?
- Were addition and subtraction rounded by decimal places?
- Were multiplication and division rounded by significant figures?
- Were intermediate values kept unrounded until the final step?
- Is the final unit present and consistent?
- Are ambiguous trailing zeros clarified with scientific notation?
- Does the reported precision agree with the instrument or stated uncertainty?
If any answer is no, recalculate from the original inputs rather than repeatedly rounding the displayed result. That simple habit makes a significant figures calculator, spreadsheet or hand calculation easier to audit and keeps the reported answer aligned with the evidence behind it.